Fila MP/90 is a special impregnating liquid for various purposes:

For the protection of polished porcelain tiles: for easier removal of routine and stubborn dirt.

As a protective basecoat, to be followed by a suitable wax, for high absorbency and unpolished natural stone pavings (e.g. 'pietra serena', 'peperino'. etc.)

As stainproofing agent for polished natural stone surfaces (e.r. marble and granite). It is especially recommended on tables, kitchen worktops, window sills and floors at risk of staining.

As a protection against graffiti and posters on walls with stone finidhes, and for easier graffiti removal.

 

5 litre cans in cartons of 4

1 litre cans in cartons of 12

250ml cans in cartons of 12

 

Blend of silicone compounds dispersed in de-aromatised hydrocarbon solvent.

 

Ventilate the premises thoroughly during use and while the product is drying.

 

Dilution: do not dilute. Ready to use.

Application: For protection of polished porcelain tile floors and polished natural stone surfaces: apply a light, even, continuous coat of Fila MP/90 with a flat brush. After 24 hours, when the floor is dry, remove the excess from the surface with a single-disc professional polisher fitted with a white or beige disc, or a household polisher fitted with felt pads (or a dry cloth). Any stubborn residues due to over-application can be removed with a cloth dipped in Filasolv; this allows the excess to be respread and removed simultaneously, so the floor is ready for use at once.

 

For protecting unpolished natural stone pavings: Check that the surface for protection is dry and absorbent. Brush on a coat of Fila MP/90. After 24 hours, when the floor is dry, complete the treatment with Stonewax or Filalonglife.

Caution: when Fila MP/90 is used to protect unpolished natural stone pavings, the product should first be tested on a small portion of the surface to check for any changes in colour.

 

Symbols: St Andrew's Cross (N).

Risk warnings: flammable product. Harmful; may cause lung damage if swallowed.

Safety warnings: do not inhale vapours. Avoid contact with the skin. If swallowed, do not stimulate vomiting; consult a doctor immediately, showing him the container or label.

Contains: de-aromatised mineral turpentine.

 

Appearance: transparent liquid.

Colour: colourless

Odour: slight odour of solvent

Density: 0.775kg/litre

Flash point: 40°C

 

For polished porcelain tiles and polished stone: 2-3 litres for 100m2.

For natural stone: from 5 to 10 litres for 100m2 depending on the type of material.