MATT EFFECT WAX
WHAT IT'S FOR
Filamatt is a wax for application in all cases requiring protection and a non-glossy finish which leaves the material's natural appearance unchanged.
Especially suitable as finishing coat in wax treatments of indoor terracotta, klinker, antique-effect marble or natural stone floors; also gives good results in subsequent care, either pure or diluted using the wash'n wax method.
HOW IT'S USED
Dilution: depending on the type of application, this product should be used pure (as final coat in treatment) or diluted (for care).
Application: spread a coat of undiluted product with a rag or fleece, wait for it to dry (about an hour) and then apply a second coat at right-angles to the first. The floor can be walked over after one hour; it can also be polished if preferred, giving a slight increase in gloss.
Maintenance: the product can be used undiluted to reduce the gloss of a previous treatment , or diluted using the wash'n wax method, with 2-3 cups of the product in the bucket of washing water.
CONTAINERS
5 litres canisters in cartons of 4.
1 litre canisters in cartons of 12.
COMPOSITION
Aqueous emulsion of hard waxes and polymers with addition of matting agent and other appropriate additives.
PRECAUTIONS
Keep the container at room temperature; this product is not frost-resistant in container. Can be removed using the specific Fila DX/83 dewaxing agent for water-based waxes.
TECHNICAL CHARACTERISTICS
Appearance: milky white liquid
Odour: flowery
pH: 8
Density: 0.98 kg/litre
LABELLING
No risk and safety labels or warnings are required since this product is not classified as hazardous under current regulations.
COVERAGE
2-3 litres for 100m2 on average, depending on the type of floor.